Differences

This shows you the differences between two versions of the page.

--- doc:hw_flash-from-usb-stick [2015/02/23 19:42] – [Start it] admin
+++ doc:hw_flash-from-usb-stick [2015/02/23 19:49] – [Start it] admin
@@ Line 46: / Line 46: @@
 The setup will download a lot of software packages to extend your Knoppix system.
-After finishing, you will find a OOBD Icon on your desktop which provides you with a menu to flash the bootloader via USB-Serial Adaptor or the firmware serial or via Bluetooth. It's also contains a test via Bluetooth for a dongle which tests the hardware (LEDs, Buzzer, CAN & KL-Bus). For a successful CAN & KL-Test some special external hardware needs to be connected.
+After finishing, you will find a OOBD Icon on your desktop which provides you with a menu to flash the bootloader and/or firmware via USB-Serial-Adaptor. You might also flash the firmware via bluetooth with an intact bootloader. It also contains a test via Bluetooth for a dongle which tests the hardware (LEDs, Buzzer, CAN & KL-Bus). For a successful CAN & KL-Test some special external hardware needs to be connected.