User Tools

Site Tools


doc:hw_flash-from-usb-stick

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
doc:hw_flash-from-usb-stick [2015/02/23 19:44] admindoc:hw_flash-from-usb-stick [2015/05/14 12:23] (current) admin
Line 39: Line 39:
    export http_proxy="http://"$HTTP_HOST:$HTTP_PORT    export http_proxy="http://"$HTTP_HOST:$HTTP_PORT
 fi fi
-wget http://oobd.googlecode.com/svn/trunk/tools/dongleTest/setup.sh -O setup.sh+wget https://github.com/stko/oobd/trunk/tools/dongleTest/setup.sh -O setup.sh
 chmod +x setup.sh chmod +x setup.sh
 ./setup.sh ./setup.sh
Line 46: Line 46:
 The setup will download a lot of software packages to extend your Knoppix system. The setup will download a lot of software packages to extend your Knoppix system.
  
-After finishing, you will find a OOBD Icon on your desktop which provides you with a menu to flash the bootloader via USB-Serial Adaptor or to flash the firmware serial or via Bluetooth. It'also contains a test via Bluetooth for a dongle which tests the hardware (LEDs, Buzzer, CAN & KL-Bus). For a successful CAN & KL-Test some special external hardware needs to be connected.+After finishing, you will find a OOBD Icon on your desktop which provides you with a menu to flash the bootloader and/or firmware via USB-Serial-Adaptor. You might also flash the firmware via bluetooth with an intact bootloader. It also contains a test via Bluetooth for a dongle which tests the hardware (LEDs, Buzzer, CAN & KL-Bus). For a successful CAN & KL-Test some special external hardware needs to be connected.
  
doc/hw_flash-from-usb-stick.1424717093.txt.gz · Last modified: 2015/02/23 19:44 by admin